Installing a Dashcam and Bed Cover at a Ford Dealer in the Philippines — Dealer Install for Warranty, 3 Hours and a High Price
A Korean dad living in Cebu goes to pick up the registration for his new Ford Ranger and, worried about the warranty, has the dealer install a dashcam and a tri-fold bed cover. It was expensive, the work was done by an outside shop's staff, and it took about 3 hours.
💡 Key takeaways
[Registration and insurance]
• The car registration came out about a month after he received the car. He says he couldn't drive far without it.
• Comprehensive insurance is with Standard Insurance. For claims, tell the dealer and they'll assist; dealer staff will contact him before renewal.
• The video's captions say comprehensive insurance is mandatory until the car loan is paid off.
[Warranty and dealer installs]
• The host heard that car brands in the Philippines sometimes deny warranty if you install electronics not bought and installed through them during the warranty period.
• Simple stick-on accessories or tire changes are said to be fine, but a dashcam needs fuse box wiring, so he chose the dealer's product.
• He brought his own dashcam from Korea but ended up installing the dealer's rear-view-mirror type.
• Even the dealer installs aftermarket products. The bed cover was installed by staff from an off-road accessory shop in Cebu, and he believes the dealer adds a margin.
• Prices are much higher than outside car shops or online. He sums up that quality and price were no better than DIY, but at least he kept a reason for warranty coverage.
[Ford Ranger notes]
• The base model has no rear camera or sensors, and the monitor has no port for a rear camera. So he installed a dashcam with a rear camera instead.
• The tailgate has no lock by design, so it stays open even when the car is locked. He plans to buy a lock online and fit it himself.
• The Raptor's rear bumper rail is welded because of towing weight, while the regular Ranger's is bolted, so a Raptor bumper can't be fitted on a regular Ranger.
• There's no fuse diagram in the car (he says it's in the online manual).
[Choosing a bed cover]
• A manual roller-type cover (one that rolls inside) costs about 1 million KRW by his account. Once installed it can't be removed and the roller eats into cargo space, a downside for long items or a motorbike.
• The tri-fold type needs no drilling, so less damage to the car, and it can be removed. But it's not fully waterproof.
• Without a cover, he felt uneasy putting luggage in the bed in case someone took it.
[What happened during installation]
• The dashcam's original power cable didn't work in any port; after about an hour of struggling, the technician modified a cigarette-lighter cable to connect it.
• The rear camera wire was routed through a drain hole (rubber cap) under the driver's seat. He plans to seal it with silicone later.
• The dashcam took about 2 hours 30 minutes and the cover about 30 minutes, about 3 hours in total (he expected 2 hours).
• The tri-fold cover has gaps that may let water in during heavy rain, and the screws didn't even match in color.
• The staff threw away the included double-sided tape and sponge instead of attaching them. He says he'd never have known if he hadn't been watching, so check for yourself when a dealer installs something.
[Using the dashcam]
• It's a mirror type: a mirror when off, a screen when on. In reverse it switches to the rear view, which is wider-angle than expected with decent picture quality.
• The rear camera has no light. Without a rear bumper, it's still hard to judge distance.
⏱ Chapters
00:02 Heading to Ford for the registration, warranty worries
01:02 Choosing the dashcam and tri-fold cover
02:04 Base model limits, dealer prices, roller cover downsides
03:04 Raptor vs regular Ranger bumper rails
04:05 Installation starts, outside shop staff
05:06 Tailgate with no lock, insurance briefing
06:08 Dashcam wiring trouble
08:12 Tri-fold cover install and waterproofing
10:22 Jollibee, checking the dashcam screen
11:22 Cover gaps and missing tape
💬 What viewers said (187 comments)
• Most comments urged him to remove the protective plastic still on the new car's seats after a month. Several replied that he said in the last video it's a fabric seat and he's waiting for ordered seat covers.
• Many felt 2 hours 30 minutes for a dashcam was far too long and the installer seemed inexperienced. Tips included cigarette-lighter power with a backup battery and checking the fuse's output side.
• One viewer shared that Ford accessories and servicing in the Philippines are expensive, so he gave up the warranty and uses outside shops; others said it's better to add options when buying.
• Others remarked how much the kids have grown and liked how patiently he waited.
Even if you cherish a new car, removing the plastic gets you away from hormone-disrupting chemicals ㅠ
In Korea too, staff from outside parts companies come to install, and the dealership takes about a 30–40% margin. The brand does give a warranty for a set period.
Is it cheaper to buy a Ford in the Philippines? Or to buy a Kia Tasman pickup in Korea and import it to the Philippines?

Comments 0
Please log into write a comment.